The 51.2V 100Ah Wall mounted LiFePO4 Battery is a compact, high-efficiency energy storage solution tailored for residential, small commercial, and indoor applications where floor space is limited and wall mounting is preferred. With a nominal voltage of 51.2V (a common voltage for 16-cell LiFePO4 packs) and a 100Ah capacity, it provides a total energy output of 5.12kWh (51.2V × 100Ah = 5120Wh = 5.12kWh)—enough to power essential home appliances (like refrigerators, lights, and small HVAC systems) during power outages, or store excess energy from residential solar panels for use at night.

Its wall-mounted design is a standout feature, allowing it to be installed on garage walls, utility room walls, or inside storage closets—freeing up floor space that would otherwise be occupied by a floor-standing battery. The mounting hardware is typically included, and most models are lightweight (around 30 to 40 kg) compared to lead-acid batteries of similar capacity (which can weigh 80 to 100 kg), making installation easier for homeowners or small business owners. The sleek, low-profile casing (often made from fire-retardant plastic or aluminum) also blends well with indoor decor, making it suitable for visible areas like home offices or utility rooms.

Like all LiFePO4 batteries, this model offers exceptional safety and longevity. It has a cycle life of 3000 to 5000 cycles at 80% DoD, meaning it can last 8 to 12 years in residential use (where charging and discharging occur once or twice daily). It also has a high operating temperature range (-20°C to 60°C), making it suitable for homes in both cold and warm climates. The built-in BMS is critical here, as it continuously monitors the battery’s health—preventing overcharging (a common risk with solar systems), over-discharging (which can damage batteries), and short-circuiting. The BMS also balances the voltage of individual cells, ensuring consistent performance and extending the battery’s lifespan.

Performance-wise, the 51.2V 100Ah Wall mounted LiFePO4 Battery delivers steady power for both backup and daily use. It has a discharge rate of 1C to 1.5C, allowing it to power a 500W refrigerator and 100W of lights for approximately 8 hours (based on 5.12kWh total energy and 600W average load). For solar users, it efficiently stores excess energy generated during the day, reducing reliance on the grid and lowering electricity bills. It also supports smart integration with home energy management systems (HEMS), allowing users to monitor SoC, energy usage, and charging schedules via a smartphone app—adding convenience and control.

Compatibility is broad, as it works with most 51.2V solar inverters (such as those from SMA, Victron Energy, or Growatt) and charge controllers. It is also suitable for off-grid small homes or cabins, where it can be paired with a solar panel array to provide reliable power. For users seeking a space-saving, long-lasting energy storage solution for their home or small business, the 51.2V 100Ah Wall mounted LiFePO4 Battery is an excellent choice—combining safety, efficiency, and ease of installation.

Read recommendations:

storage battery systems

Flood Lights for Outdoor Security

NK01 All-in-one

PB600US

PB-MN1000W